Features
January / February 2022

Measuring Pharma’s Adoption of Industry 4.0

Toni Manzano
Agustí Canals, PhD
Figure 3: Adoption time in years experienced by nonpharmaceutical and pharmaceutical industries since the technologies were invented/discovered.

With the rise of new technologies and predictive analytics capable of handling the huge amounts of data within and across existing information systems, Industry 4.0 has been thriving in many sectors, such as industrial automation, financial technology, retail, and semiconductors. But the health sector in general,Singh, P., S. N. Singh, and L. Ram. “Health 4.0: Role of Health Information Services—A Review.” ABS International Journal of Management 6, no. 2 (December 2018): 31–36. https://absjournal.abs.edu.in/abs-Journal-volume-6-issue-2-december-2018/ and the pharmaceutical industry in particular,Pott, A. “Industry 4.0 in the Medical Technology and Pharmaceutical Industry Sectors.” Healthcare Industry BW. BIOPRO Baden-Württemberg GmbH, October 2016. https://www.gesundheitsindustrie-bw.de/en/article/dossier/industry-40-in-the-medical-technology-and-pharmaceutical-industry-sectors has been considered a conservative area, in which innovation has not been adopted as quickly as in other sectors. This article explores how the pharmaceutical industry’s adoption of innovation is measured and how the regulated nature of the industry may influence its pace of innovation.

Given the significant advances digital technologies have brought to the automotive, agricultural, and retail industries,Paunov, C. and S. Planes-Satorra. “How Are Digital Technologies Changing Innovation? Evidence from Agriculture, the Automotive Industry and Retail.” OECD Science, Technology and Industry Policy Papers no. 74 (July 2019). doi:10.1787/67bbcafe-en the pharmaceutical industry should start adopting these technologies to stay competitive in an evolving market. Potential causes of delays in pharmaceutical innovation include re-cent mergers between large corporationsComanor, W. S. and F. M. Scherer. “Mergers and Innovation in the Pharmaceutical Industry.” Journal of Health Economics 32, no. 1 (2013): 106–113. doi:10.1016/j.jhealeco.2012.09.006 and the influence of pharmaceutical CEOs on their companies’ research and development (R&D) priorities.van de Wal, N., C. Boone, V. Gilsing, and B. Walrave. “CEO Research Orientation, Organizational Context, and Innovation in the Pharmaceutical Industry.” R&D Management 50, no. 6 (October 2019): 239–254. doi:10.1111/radm.12394 There is a lot of evidence that shows the slow adoption of innovation in the pharmaceutical industry, but how much delay exists in the pharmaceutical industry when compared with other sectors? Could this delay be quantified? Are the regulatory bodies as slow to innovate as pharmaceutical firms? This article seeks to answer these questions.

Pharmaceutical regulations have expanded globally since the early 1960s, leading some observers to suggest that resources dedicated to meeting regulatory requirements and exhaustive quality control are diverted from R&D and innovation.US Food and Drug Administration. “A History of the FDA and Drug Regulation in the United States.” https://www.fda.gov/files/drugs/published/A-History-of-the-FDA-and-Drug-Regulation-in-the-United-States.pdf, Grabowski, H. G., J. M. Vernon, and L. G. Thomas. “Estimating the Effects of Regulation on Innovation: An International Comparative Analysis of the Pharmaceutical Industry.” The Journal of Law & Economics 21, no. 1 (1978): 133–163. https://www.jstor.org/stable/725144 A prominent explanation lies in the regulatory requirements of the pharmaceutical industry.Nicholson Price, W. “Making Do in Making Drugs: Innovation Policy and Pharmaceutical Manufacturing.” Boston College Law Review 55, no. 2 (March 2014). https://lawdigitalcommons.bc.edu/bclr/vol55/iss2/5, Rogers, E. M. Diffusion of Innovations, 3rd edition. The Free Press, 1983. Regulators are involved in the process of new technologies, working with the industry on these and approving them through often accelerated processes.

Furthermore, health authorities are making efforts to spur innovation in the pharmaceutical industry. For example, in 2017, the US FDA created the Emerging Technology Program,US Food and Drug Administration. “Guidance for Industry. Advancement of Emerging Technology Applications for Pharmaceutical Innovation and Modernization.” FDA-2015-D-4644. FDA Center for Drug Evaluation and Research (CDER), September 2017. https://docs.regulations.justia.com/entries/2017-09-29/2017-20861.pdf with the objective of promoting innovative approaches for pharmaceutical product design and manufacturing. The FDA members who participate in this program discuss, identify, and resolve potential technical and regulatory issues regarding the development and implementation of novel technologies, with a clear purpose of supporting innovation initiatives. In Europe, the EMA established the Process Analytical Technologies (PAT) Team and in the UK, the MHRA leads this topic though the Innovation Office. The Pharmaceutical and Medical Devices Agency of Ja-pan manages equivalent proposals within the Innovative Manufacturing Technology Working Group.

Industry 4.0 Research

In 2017, Liao and colleagues completed a systematic literature review of the past, present, and future of Industry 4.0,Liao, Y., F. Deschamps, E. de Freitas Rocha Loures, and L. F. Pierin Ramosa. “Past, Present and Future of Industry 4.0 — A Systematic Literature Review and Research Agenda Proposal.” International Journal of Production Research 55, no. 12 (2017): 3609–3629. doi:10.1080/00207543.2017.1308576 identifying 224 papers focused on a direct prevalence of the Fourth Industrial Revolution. In the conclusions of this study, the authors noted there were no relevant references regarding regulatory framework, which would be most associated with pharma contexts. The uniqueness of the research topic makes it difficult to explore academic resources describing how recent technologies, mainly brought by Industry 4.0, have been implemented in the pharmaceutical industry.

Some examples of technologies that have seen early adoption in industries other than the pharmaceutical industry include infrared spectroscopy,Scotter, C. “Use of Near Infrared Spectroscopy in the Food Industry with Particular Reference to Its Applications to On/In-Line Food Processes.” Food Control 1, no. 3 (1990): 142–149. doi:10.1016/0956-7135(90)90006-X radio frequency identification (RFID),Taylor, D. “RFID in the Pharmaceutical Industry: Addressing Counterfeits with Technology.” Journal of Medical Systems 38, no. 11 (November 2014). doi:10.1007/s10916-014-0141-y specific software for continuous quality controlPeterson, J. J., R. D. Snee, P. R. McAllister, T. L. Schofield, and A. J. Carella. “Statistics in Pharmaceutical Development and Manufacturing.” Journal of Quality Technology 41, no. 2 (2009): 111–134. doi:10.1080/00224065.2009.11917764 and, more recently, artificial intelligence (AI)Mike Barlow. Artificial Intelligence Across Industries. O’Reilly Media, May 2017. and big dataLi Ping. Data Science for Modern Manufacturing. O’Reilly Media, July 2016. applications. There are also differences regarding technology adherence within the pharmaceutical industry itself. There is a prominent divergence in the success seen by manufacturing operations compared with R&D departments, which further bifurcates the data.Malerba, F. and L. Orsenigo. “The Evolution of the Pharmaceutical Industry.” Business History 57, no. 5 (June 2015): 664–687. doi:10.1080/00076791.2014.975119 Finally, some initiatives are establishing a scale for the digitization maturity levelAnttonen, E., H. Begi, M. Dubs, I. Helliwell, and J. Selva. “The Development of a Digital Plant Maturity Model to Aid Transformation in Biopharmaceutical Manufacturing.” Technical report, BioPhorum Operations Group, December 2016. https://www.biophorum.com/download/the-development-of-a-digital-plant-maturity-model-to-aid-transformation-in-biopharmaceutical-manufacturing/ or the technology adoption degree assumed by emergent pharmaceutical markets versus consolidated geographical areas.

The Influence of Regulators

Regulatory agencies can influence the implementation of innovation, as illustrated by the thalidomide episode and the American pharmaceutical industry. After the incident, an attributable slowdown was confirmed by the American pharmaceutical industry, and there was widespread impact that lasted for more than 10 years after the fatal episode.Katz, A. “Pharmaceutical Lemons: Innovation and Regulation in the Drug Industry.” Michigan Telecommunications & Technology Law Review 14 (1) (2007).. In Europe, a mimetic reaction ended in a comprehensive benefit for both patients and business due to regulation, ensuring the expected quality of final products, reducing the probability of harm in society, and protecting companies from potential counterfeit products.Achilladelis, B. and N. Antonakis. “The Dynamics of Technological Innovation: The Case of the Pharmaceutical Industry.” Research Policy 30, no. 4 (2001): 535–588. doi:10.1016/S0048-7333(00)00093-7 Other views hold both regulatory agencies (specifically the FDA) and pharmaceutical companies responsible for the lack of innovation. Old facilities, legacy technologies, and outdated production procedures contribute to, and may be the ultimate cause behind, the lack of modernization in drug manufacturing [8]. However, pharmaceutical companies may have to use outdated technology and process due to the cost of re-validation tasks: Overhead costs resulting from quality requirements for the R&D and manufacturing operations can add up to 40% of the total structural cost in companies.Pisano, G. P. The Development Factory: Unlocking the Potential of Process Innovation. Harvard Business Press, 1997.

However, regulators work to support innovation: Initiatives promoted by public administrations like the Emerging Technology Program created by the US FDA are oriented to facilitate the adoption of new technologies in the regulated manufacturing industry. Previous attempts proposed by worldwide institutions, such as the ICH Q8 guideline,International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. “ICH Guideline Q8 (R2) on Pharmaceutical Development (Step 5).” European Medicines Agency website. June 2017. https://www.ema.europa.eu/en/documents/scientific-guideline/international-conference-harmonisation-technical-requirements-registration-pharmaceuticals-human-use_en-11.pdf describe how to get and apply knowledge through specific technology elements in pharmaceutical development to ensure quality product by means of a scientific approach. Additionally, the initiatives such as the FDA guidance accelerate approvals for medicines required to treat rare and life-threatening maladies.US Food and Drug Administration. “Guidance for Industry. Expedited Programs for Serious Conditions–Drugs and Biologics,” 0910-0765. US Department of Health and Human Services, Center for Drug Evaluation and Research (CDER) and Center for Biologics Evaluation and Research (CBER), May 2014. https://www.fda.gov/media/119748/download

Pharma 4.0™

During the opening plenary session at the 2018 ISPE Continuous Manufacturing Workshop,Yu, L. “Continuous Manufacturing Workshop.” In Opening Plenary Session. ISPE, June 2018. Lawrence Yu, Deputy Director of the Office of Pharmaceutical Quality in the FDA Center for Drug Evaluation and Research, highlighted the potential impact of Industry 4.0, through the use of AI and other 4.0 technologies, on pharmaceutical manufacturing and personalized medicines. Under the concept of Pharma 4.0™, systems and equipment have become increasingly interconnected with the use of digital technologies, which can provide unprecedented opportunities for the pharmaceutical industry. Regulatory agencies are demonstrating flexibility when faced with critical events that require a particularly quick response, such as during the COVID-19 pandemic.U.S. Food and Drug Administration. “Guidance for Industry. Temporary Policy Regarding Enforcement of 21 CFR Part 118 (the Egg Safety Rule) During the COVID-19 Public Health Emergency.” April 2020. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/temporary-policy-regarding-enforcement-21-cfr-part-118-egg-safety-rule-during-covid-19-public-health This same attitude has been shown regarding innovation adoption. A clear example is the request for support published by the FDA to consider AI as a valid component to be included in medical devices.U.S. Food and Drug Administration. “Proposed Regulatory Framework for Modifications to Artificial Intelligence/Machine Learning (AI/ML)-Based Software as a Medical Device (SaMD). Discussion Paper and Request for Feedback.” April 2019. https://www.fda.gov/files/medical%20devices/published/US-FDA-Artificial-Intelligence-and-Machine-Learning-Discussion-Paper.pdf

Determining the pace of adoption for specific technologies in the pharmaceutical sector and other manufacturing industries can provide a clear picture about the overall pace of adopting innovation.

Pace of Adopting Innovation

Determining the pace of adoption for specific technologies in the pharmaceutical sector and other manufacturing industries can provide a clear picture about the overall pace of adopting innovation and, specifically, the lack of innovation attempted by pharmaceutical manufacturing. Drugs are products with sensitive impact in society, and they need to be well controlled throughout their entire life cycle. Taking this assumption as a legal imperative, regulators have a crucial role around the entire process. In terms of innovation, regulatory agencies must determine how new technology implementations will impact the quality, safety, or efficacy of the final product and ensure these technologies are under control and can be implemented without risk to the patient.Heads of Medicines Agency and European Medicines Agency. HMA-EMA Joint Big Data Taskforce. Summary report EMA/105321/2019, February 2019. https://www.ema.europa.eu/en/documents/minutes/hma/ema-joint-task-force-big-data-summary-report_en.pdf When changes are introduced within already approved procedures, they must be revalidated; this fact is usually considered as a penalty introduced by the regulatory requirements.Markarian, J. “Modernizing Pharma Manufacturing.” Pharmaceutical Technology 42, no. 4 (April 2018): 20–25. https://www.pharmtech.com/view/modernizing-pharma-manufacturing Nevertheless this assumption is completely wrong. Regulatory bodies are enablers and facilitators of innovation that always ensure patient rights and mainly their health. A clear evidence of the regulatory agencies support of new technologies is based on the incorporation of companies’ technology recommendations into their guidelines.

Comparative Study

In this comparative study across industries, historic moments will be examined, including when specific technologies were adopted by pharmaceutical companies compared with early adopters in other industries. Looking at similar technologies that have been adopted by the pharmaceutical industry and comparing their early acceptance with when they were endorsed by other sectors can help illustrate the different pace of technology adoption between both groups and provide a clear picture about the lag experienced by pharmaceutical manufacturers. (Actually, the pharmaceutical industry is still progressing through the automation challenges related to Industry 3.0, although it may bypass further implementation and progress directly to Pharma 4.0™ ).

This idea can be extended to other functions within the pharmaceutical industry, specifically the large difference between R&D and manufacturing.International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use. “ICH Guideline Q12 on Technical and Regulatory Considerations for Pharmaceutical Product Lifecycle Management.” European Medicines Agency website. November 2019. https://www.ema.europa.eu/en/documents/scientific-guideline/ich-guideline-q12-technical-regulatory-considerations-pharmaceutical-product-lifecycle-management_en.pdf The measurement of technology adoption will be the basis to create an index that might be used to establish a quantification for the adoption of innovation in the pharmaceutical industry. In addition, a broad perspective will be drawn, which will include the technologies’ date of discovery/invention and when they were officially included by regulatory agencies in the pharmaceutical industry.

For example, the ICH Q8 guideline referenced previously was designed to help companies, reviewers, and inspectors perform their tasks more efficiently. The foundation of this guidance establishes the demonstration of deep knowledge of pharmaceutical and manufacturing sciences as the main driver to create a basis for flexible regulatory models. An explicit reference to near-infrared (NIR) is designated in this document as valid technology for real-time release when it is properly described in terms of process understanding within the submission. The guidance describes how the implementation of NIR for unit dose uniformity control would be integrated into the process when the expected uniformity is achieved, without waiting for a fixed time as is usually required in classic recipes. But NIR is not the only spectroscopical technology used to perform homogeneity tests; other implementations include Raman or mass spectroscopy. When more than one technique is available for a specific innovation, those techniques are also considered for inclusion in the documentation.

The selected technologies have been identified as relevant and innovative applications that were deployed in drug manufacturing at some stage of the product life cycle. To be included in this study, the technologies had to be referenced by regulatory bodies. Records associated with official regulations in the pharmaceutical industry supporting or describing guidelines for the proposed technologies have been included in the analysis to identify potential links among official constraints and speed of technological adoption effects.

Technologies as Transformation Enablers

The collected records correspond to technologies that are considered transformation enablers within manufacturing processes because the industries experienced improvement after or during implementation of these technologies. Examples of enhancements in the pharmaceutical industry provided by innovation are associated with a reduction of variations brought on by the inevitable manual operations and uncontrolled properties of raw materials. Applying this reasoning, the following technologies were considered in the research.

Spectroscopy

Spectroscopy allows real-time testing during manufacturing. It is usually mentioned in pharmaceutical guidelines motivating systems for nonintrusive measurements and is broadly referenced for PAT applications.Ferreira, A. P. and M. Tobyn. “Multivariate Analysis in the Pharmaceutical Industry: Enabling Process Understanding and Improvement in the PAT and QbD Era.” Pharmaceutical Development and Technology 20, no. 5 (2015): 513–527. doi:10.3109/10837450.2014.898656 NIR, Raman, and mass spectroscopy are the spectroscopy techniques discussed here. Regulatory agencies extensively recommended NIR as a way to implement process control to acquire online knowledge of product attributes without physical contact. Spectroscopy techniques have been used and standardized in pharmaceutical manufacturing as an analytical method for quality control and process verification.Reich, G. “Near-Infrared Spectroscopy and Imaging: Basic Principles and Pharmaceutical Applications.” Advanced Drug Delivery Reviews 57, no. 8 (2005): 1109–1143. doi:10.1016/j.addr.2005.01.020

Chromatography

Chromatography is a multivariate technique used for substance identification in production environments and for purification in biotechnology processes. It is used to separate components in mixtures, presenting different methods depending on the characteristics of the components contained in the sample. Using chromatography for purification is an implementation widely applied in pharma-biotechnology operations, and it is well established in the pharmaceutical and other industries.National Academies of Sciences, Engineering and Medicine. “Continuous Manufacturing for the Modernization of Pharmaceutical Production: Proceedings of a Workshop.” The National Academies Press, January 2019. doi:10.17226/25340 For this reason, chromatography will be included as a relevant method in manufacturing. High-performance liquid chromatography (HPLC) and mass chromatography are the representative techniques of this technology.

Lyophilization

Lyophilization is a physical process in which water is eliminated by sublimation in products and the manufactured item is then subjected to vacuum conditions. Lyophilization is extensively used in the food industry and mainly applied in drug manufacturing for batch process freeze-drying and continuous process spray-drying. It’s worth noting that 46% of FDA-approved protein, peptide, vaccine, oligonucleotide, and cell-based products are produced using this technique.Kumar, G., N. Prashanth, and B. Kumari. “Fundamentals and Applications of Lyophilization.” Journal of Pharmaceutical Advanced Research 2, no. 4 (2011):157–169. https://www.academia.edu/23830890/Fundamentals_and_Applications_of_Lyophilization

Radio Frequency Identification

RFID is a widespread technology used in logistics and manufacturing to track and ensure traceability of materials and products, and it requires sophisticated mechanisms that have been globally adopted. RFID enables total traceability along the product supply chain. Product traceability is required in drug manufacturing and one of its most known applications is to avoid counterfeits.

Artificial Intelligence

Although is a computing term that, strictly speaking, is not a technology, the introduction of this discipline in the industry boosted technological breakthroughs driven by the Industry 4.0 wave,Mike Barlow. Artificial Intelligence Across Industries. O’Reilly Media, May 2017. impacting the pharmaceutical industry as well.Markarian, J. “Embracing the Digital Factory for Bio/Pharma Manufacturing.” Pharmaceutical Technology Europe 43, no. 3 (March 2019): 16–21.

3D Printing

3D printing is a technology born in the 1980s that creates three-dimensional objects by adding layers of material to fill sequential and consecutive sections of the object. More than 30,000 patents regarding 3D printing have been reported in the US alone, and its industrial expansion is mainly due to support from open-source computer programs.Savini, A. and G. G. Savini. “A Short History of 3D Printing: A Technological Revolution Just Started.” 2015 ICOHTEC/IEEE International History of High Technologies and Their Socio-Cultural Contexts Conference (HISTELCON), 2015: 1–8. doi:10.1109/HISTELCON.2015.7307314


Table 1: Innovation dates extracted from literature.
Innovation Discovery or Invention Nonpharma Industry Pharmaceutical
Industry
Regulatory
NIR Spectroscopy 1800
Blanco, M. and I. Villarroya. “NIR Spectroscopy: A Rapid-Response Analytical Tool.” TrAC Trends in Analytical Chemistry 21, no. 4 (2002): 240 – 250. doi:10.1016/S0165-9936(02)00404-1
1938
Ellis, J. W. and J. Bath. “Modifications in the Near Infra-Red Absorption Spectra of Protein and of Light and Heavy Water Molecules When Water Is Bound to Gelatin. Journal of Chemical Physics 6, no. 11 (1938): 723–729. doi:10.1063/1.1750157
1977
Aenugu, H. P. R., D. S. Kumar, N. P. Srisudharson, S. Ghosh, and D. Banji. “Near Infra Red Spectroscopy–An Overview.” International Journal of ChemTech Research 3, no. 2 (2011): 825–836. https://www.researchgate.net/publication/216656944_Near_Infra_Red_Spectroscopy-_An_Overview
2004
Mass Spectrometry 1917
Yates III, J. R. “A Century of Mass Spectrometry: From Atoms to Proteomes.” Nature Methods, 8, no. 8 (2011): 633–637. doi:10.1038/nmeth.1659
1920
1990
Ramanathan, R. and W. Korfmacher. “The Emergence of High-Resolution MS as the Premier Analytical Tool in the Pharmaceutical Bioanalysis Arena.” Bioanalysis 4, no. 5 (2012): 467–469. doi:10.4155/bio.12.16
2003
US Food and Drug Administration. “Guidance for Industry. Mass Spectrometry For Confirmation of the Identity of Animal Drug Residues.” May 2003, 1–12. https://www.govinfo.gov/content/pkg/FR-2003-05-13/pdf/03-11771.pdf
Raman Spectroscopy 1928
Ellis, D. I., D. P. Cowcher, L. Ashton, S. O’Hagan, and R. Goodacre. “Illuminating Disease and Enlightening Biomedicine: Raman Spectroscopy as a Diagnostic Tool.” Analyst 138, no. 14 (2013): 3871–3884. https://pubs.rsc.org/en/content/articlelanding/2013/an/c3an00698k#!divAbstract
1987
Esmonde-White, K., A. M. Cuellar, C. Uerpmann, B. Lenain, and I. R. Lewis. “Raman Spectroscopy as a Process Analytical Technology for Pharmaceutical Manufacturing and Bioprocessing.” Analytical and Bioanalytical Chemistry 409, no. 3 (2017): 637–649. doi:10.1007/s00216-016-9824-1
2002
2004
High-Performance Liquid
Chromatography (HPLC)
1941
Majors, R. E. “Historical Developments in HPLC and UHPLC Column Technology: The Past 25 Years.” LCGC North America 33, no. 11 (November 2015): 818–840. https://www.chromatographyonline.com/view/historical-developments-hplc-and-uhplc-column-technology-past-25-years
1966
1972
1994
Center for Drug Evaluation and Research. “Reviewer Guidance: Validation of Chromatographic Methods.” 1994. Accessed 24 November 2020. http://www.fda.gov/downloads/Drugs/Guidances/UCM134409.pdf
Gas Chromatography 1952
Bartle, K. D. and P. Myers. “History of Gas Chromatography.” Trends in Analytical Chemistry 21, no. 9-10 (2002): 547–557. doi:10.1016/S0165-9936(02)00806-3
1962
1985
1994
Lyophilization 1890
Bürger, H. D. “Geschichte der Gefriertrocknung bis 1910.” Vakuum in Forschung und Praxis 18, no. 4 (2006): 19–23. https://www.deepdyve.com/lp/wiley/geschichte-der-gefriertrocknung-bis-1910-D03VPnQPPg
1935
Costantino, H. R. and M. J. Pikal. Lyophilization of Biopharmaceuticals, Volume 2. Springer Science & Business Media, 2004.
1950
1993
US Food and Drug Administration. “Guide to Inspection of Lyophilization of Parenterals.” November 2014. https://www.fda.gov/inspections-compliance-enforcement-and-criminal-investigations/inspection-guides/lyophilization-parenteral-793
Radio Frequency Identification (RFID) 1948
Duroc, Y. and S. Tedjini. “RFID: A Key Technology for Humanity.” Comptes Rendus-Physique 19, no. 1-2 (2018): 64–71. doi:10.1016/j.crhy.2018.01.003
1973
Landt, J. “The History of RFID.” IEEE Potentials 24, no. 4 (November 2005): 8–11. doi:10.1109/MP.2005.1549751
2005
Howard, J. D. and J. Singh. “Implementation of RFID in the Pharmaceutical Industry.” Unpublished doctoral dissertation, California Polytechnic State University, San Luis Obispo, 2009.
2007
Zhou, W. and S. Piramuthu. “Technology Regulation Policy for Business Ethics: An Example of RFID in Supply Chain Management.” Journal of Business Ethics 116, no. 2 (2013): 327–340. doi:10.1007/s10551-012-1474-4
Artificial Intelligence (AI) 1956
Andresen, S. L. “Herbert A. Simon: AI Pioneer.” IEEE Intelligent Systems 16, no. 4 (August 2001): 71– 72. doi:10.1109/5254.941361
1988
Belli, F. and F. J. Radermacher. “Industrial and Engineering Applications of Artificial Intelligence and Expert Systems.” 5th International Conference, IEA/AIE-92, Paderborn, Germany, June 9–12, 1992. Proceedings, volume 604. Springer Science & Business Media, 1992.
2012
Aksu, B., A. Paradkar, M. de Matas, O. Ozer, T. Güneri, and P. York. “Quality by Design Approach: Application of Artificial Intelligence Techniques of Tablets Manufactured by Direct Compression.” AAPS PharmSciTech, 13, no. 4 (2012): 1138–1146. doi:10.1208/s12249-012-9836-x
2017
Pesapane, F., C. Volonté, M. Codari, and F. Sardanelli. “Artificial Intelligence as a Medical Device in Radiology: Ethical and Regulatory Issues in Europe and the United States.” Insights into Imaging 9, no. 5 (June 2018): 745–753. doi:10.1007/s13244-018-0645-y
3D Printing 1984
1986
2009
Yu, D. G., X. X. Shen, C. Branford-White, L. M. Zhu, K. White, and X. L. Yang. “Novel Oral Fast-Disintegrating Drug Delivery Devices With Predefined Inner Structure Fabricated By Three-Dimensional Printing.” Journal of Pharmacy and Pharmacology 61, no. 3 (2009): 323–329. doi:10.1211/jpp/61.03.0006
2015
Trenfield, S. J., A. Awad, A. Goyanes, S. Gaisford, and A. W. Basit. “3D Printing Pharmaceuticals: Drug Development To Frontline Care.” Trends in Pharmacological Sciences 39, no. 5 (2018): 440–451. doi:10.1016/j.tips.2018.02.006
Big Data 1985
2002
K. and M. Chen. Big-Data Analytics for Cloud, IoT and Cognitive Computing. John Wiley & Sons, 2017.
2011
Tormay, P. “Big Data in Pharmaceutical R&D: Creating a Sustainable R&D Engine.” Pharmaceutical Medicine 29, no. 2 (2015): 87–92. doi:10.1007/s40290-015-0090-x
2019

Big Data

Big data is computer science technology in which huge volumes of data belonging to a large variety of records are accessed at high velocity, which establishes the main dimensions that characterize a data management system initially architected on the Map Reduce mechanism.Chen, Y., S. Alspaugh, and R. Katz. “Interactive Analytical Processing in Big Data Systems: A Cross-Industry Study of MapReduce Workloads.” Proceedings of the VLDB Endowment 5, no. 12 (August 2012). https://www.researchgate.net/publication/230706460_Interactive_Analytical_Processing_in_Big_Data_Systems_A_Cross-IndustryStudy_of_MapReduce_Workloads This innovation has often been linked to the Internet of Things (IoT) when applied to manufacturing, because the records generated by this technology are large, varied, and quickly produced.

Key Benchmarks in Adopting Innovation

For each technology, four dates were extracted from the literature: year of discovery or invention, year first used in the industry, year first used in the pharmaceutical industry, and year it was considered by regulatory bodies. Table 1 contains the raw dates and the references from which they were extracted.

Figure 1 shows the adoption lead times of the selected technologies: first, the date of discovery or initial use, followed by adoption by nonpharmaceutical industries and then pharmaceutical industries, and finally inclusion in regulatory references. Although the periods vary depending on the technology, there is a consistent delay for all technologies regarding their adoption in the pharmaceutical industry, indicating later endorsement of the innovations in drug manufacturing and inclusion in regulations as well (taking the first implementation in other sectors as reference). The technologies have been grouped by field: chromatography, Industry 4.0 (AI, big data, 3D printing), lyophilization, and spectroscopy.

To establish indicators that may reveal inferences between the pharma industry and industry in general, regulations and gaps between the considered dates are used. Therefore, the following factors will be calculated, all measured in years:

  • The time between adoption of these technologies by the pharma and nonpharmaceutical industries (GapPharmaNonPharma)
  • The time between the pharmaceutical industry adoption and the first regulatory reference to a specific innovation (GapRegulationPharma)
  • The time between invention of discovery of the technology and its adoption by nonpharmaceutical industries (NonPharmaIndustryAdoption)
  • The time between invention of discovery of the technology and its adoption by the pharmaceutical industry (PharmaIndustryAdoption)
  • The time between invention of discovery of the technology and the first regulatory reference to a specific innovation (RegulationAdoption)

These factors normalize the measurements. The statistics calculated for each, represented by the box plots in Figure 2, indicate the presence of a clear outlier. Applying the Dixon test for outliers over the values corresponding with the discovery/invention date (displayed as Discovery.Initial.use in the box-plot of the Figure 2), produces a p value = 0.087 for the hypothesis that the NIR’s invention date is an outlier.


Figure 1: Evolution of different technologies (grouped by field) since discovery or initial use until adopted by nonpharma industries and by pharma, and included in regulatory references.

Figure 2: Box-plot representation of time distribution, in years.

In Figure 2 are Dates (left) when technologies were (a) discovered/invented (Discovery.Initial.Use); (b) adopted in pharmaceutical industries (Non.Pharma.Industry); (c) adopted in biotechnology/pharmaceutical industries (Pharma.Industry); and (d) referenced by regulatory bodies (Pharma.Regulation). On the right in Figure 2 are differences in technology adoption between (a) pharmaceutical and nonpharmaceutical industries (Gap-PharmaNonPharma); (b) pharmaceutical industry adoption and first regulatory reference (GapRegulationPharma); (c) technology discovery and nonpharmaceutical industry adoption (NonPharmaIndustryAdoption); (d) technology discovery and pharmaceutical industry adoption (PharmaIndustryAdoption); and (e) technology discovery and regulatory reference (RegulationAdoption).

Due to this evidence, the outlier is removed from the data set.Komsta, L. “Processing Data for Outliers.” The Newsletter of the R Project 6, no. 2 (May 2006): 6–10. Only the gaps between pharmaceutical and nonpharmaceutical industries and between the pharmaceutical industry and regulatory bodies are kept for the NIR technology, because both measures are calculated by means of increments between the observations and therefore, the impact on the small data set is minimized. Applying this rule, the calculated factors take the values described in Table 2.

Considering this configuration, the results indicate that although there are records referencing the initial usage of technologies in the industry generally 24 years after their discovery or invention, on average the pharmaceutical industry assimilates initial usage 48 years later (±6 years). Furthermore, technology implementation by early pharmaceutical adopters was led mainly in R&D, not in manufacturing. Regulatory bodies included the sampled technologies an average of 12 years after they were implemented in pharmaceutical activities. Beyond this figure, a reaction can be observed in the agencies when drug companies prove the feasibility of innovative systems in their internal structures. Two indexes can be created for comparing the pharmaceutical innovative adoption:

The measurement of the pharmaceutical early adoption (PEA) provides the ratio among the pharmaceutical field and the industry implementation of a specific innovation. The smaller the index, the faster the innovative adoption is in the pharmaceutical industry compared with other industries. Values for PEA greater than 1 indicate a slower process of incorporating innovation in the pharmaceutical industry. For the set of technologies discussed in this approach and represented in the Table 1, the value of PEA = 1.99.

\(\text{PEA=}\frac{PharmaIndustryAdoption}{ NonPharmaIndustryAdoption} = 1.99 \)

Comparing how quickly regulation includes new technologies compared to companies, the ratio among the difference of time needed by regulatory agencies and pharmaceutical companies and the time required for companies introducing these technologies, gives a measure of the innovative attitude of the administrations. This coefficient can be identified as REA (regulatory early adoption) and is calculated taking the pharmaceutical company as reference and not the industry because for the regulatory bodies, the implementation of new technologies only make sense once they have been accepted by pharmaceutical companies. For the set of technologies considered here, REA = 0.28, which means that the regulatory bodies are faster than pharmaceutical companies in integrating innovative applications inside their mechanisms of control.

\(\text{REA=}\frac{GapRegulationPharma}{ PharmaIndustryAdoption} = 0.28 \)

Pharma’s Delay

Sorting the technologies by their invention date and observing the adoption speed by nonpharmaceutical industries (using the NonPharma Indus-tryAdoption factor) and by pharma (using the PharmaIndustryAdoption factor), a systematic delay is observed along the history experimented by the drug manufacturing. Furthermore, the trend evidenced in Figure 3, confirmed by both categories (pharmaceutical and nonpharmaceutical industries), can be interpreted as an acceleration in the adoption of new technologies in more recent decades.


Table 2: Distribution in years of the mean and the standard deviation values for innovation adoption considering the gaps between the pharmaceutical sector and the rest of sectors, the gap among the administrations and pharmaceutical companies, the needed time for the industry in general, the period of time required the pharmaceutical industry, and the elapsed time used by regulatory bodies.
Values in Years Mean* Standard Deviation Mean Variation
Gap Pharma-NonPharma 25.60 18.54 5.86
Gap Regulation-Pharma 13.70 13.20 4.17
Nonpharma Industry Adoption 24.22 19.04 6.35
Pharma Industry Adoption 48.33 19.73 6.58
Regulation Adoption 60.55 24.16 8.05

* The mean variation ( (𝞂𝞂/√N) )  is calculated considering N including the outlier associated
to the NIR technology only for the Gap Pharma-NonPharma and Gap Regulation-Pharma
variables.


Creating sets of technologies which cluster similar innovations or keeping the specific invention as a standalone, there are five groups that can be compared by means of the PEA and REA indicators to measure the differences between the pharmaceutical industry and regulatory bodies in terms of the innovative attitude.

The spectroscopy group contains the NIR, Raman, and mass spectroscopy techniques; the chromatography group includes the HPLC and the gas systems; the Industry 4.0 group includes AI, big data, and 3D printing; lyophilization and RFID technologies constitute two independent measures that cannot be aggregated with any other innovation. The results of calculating the PEA and the REA values, based on the average of the elements for each category or using the individual values for the classes with only one element, are shown in Table 3.

Conclusions

The pharmaceutical industry can be deemed a key sector in the industrialized world for several reasons. From an innovation perspective, drug production is recognized as an industry that invests huge amounts of economic resources in R&D, where technology is a main constituent in development strategies. On average, 10% of sales is invested in the area that establishes the approach and deployment of sophisticated systems, aiming to control the production process and the facilities.Hara, T. Innovation in the Pharmaceutical Industry: The Process of Drug Discovery and Development. Edward Elgar Publishing, 2003.


Table 3: Measurements of the PEA and the REA indicators calculated for the established categories defined by the observed innovations

Table 3: Measurements of the PEA and the REA indicators calculated for the established categories defined by the observed innovations.
  Spectroscopy Chromatography Lyophilization RFID Industry 4.0
PEA 1.62 1.83 1.33 2.28 2.10
REA 0.13 0.48 0.72 0.04 0.18

Finally, drugs have been designed to provide positive outcomes for patients and to improve the welfare of the population, even though there is an undeniable risk of unfortunate episodes (where people died or the treatment did not provide the expected outcome). Although some recent opinions regarding a relaxing attitude in regulatory agencies could be misunderstood,Bush, L. “FDA Lowers Barriers to Process Improvement.” Pharmaceutical Technology 29, no. 10 (2005): 54–64. https://www.pharmtech.com/view/fda-lowers-barriers-process-improvement the reality is pointing a different direction. Health authorities are providing tools to enable more flexible drug manufacturing operations, but a demonstrated indepth knowledge of robust process and product development is required before adopting the measures introduced by regulators. The implementation of these opening rules is only accepted because they provide safer manufacturing for the benefit of the end patient.

From a patient-centric perspective, the slower innovative attitude in drug manufacturing in comparison to other industries (see Figure 3) is justified by the required control of the fabrication process to preserve the safety of patients. As regulatory agencies have repeatedly shown, they act quickly in front of critical episodes such as the coronavirus pandemic. The innovation delay cannot be explained by regulatory obstructions.

On the other hand, the introduction of new technologies in compliant guidance has been always faster than their implementation in the pharmaceutical industry, as can be observed by the REA and PEA factors in the Table 3.

Notice that the innovations linked to equipment requiring physical contact with drugs during the manufacturing operations (spectroscopy, chromatography, and lyophilization) present a PEA lower than those technologies not used to directly manage the product. However, the regulatory agencies are slower to include those techniques in their guidance than innovations not physically in contact with the drug (for example, big data or AI). The 3D printing technology is an exception in the Industry 4.0 group (PEA = 12.5, REA = 0.24), which could be related to the intrinsic relationship between the physical process creating drugs by this technology and the Industry 4.0 basis.

Finally, an acceleration can be ascertained from the regulatory agencies, including technologies developed under the umbrella of the Industry 4.0 (REA = 0.18), whereas pharmaceutical manufacturing is keeping a similar pace (PEA = 2.10) than observed for other innovations.

To ensure more rapid adoption of novel technologies, we recommend the pharmaceutical industry work more closely with all the actors involved in the community, including regulators and suppliers, to speed up the regulatory framework of these technologies, as the pharmaceutical industry can play a critical role in this process.

Acknowledgments

A technical review of this document was performed by Andrej Ondracka, who provided valuable feedback in the format and content of the document.